id&qtp&qim&qil&qtx&qca&qia&qrm&qnxt&qprv&qalb&subj&wght&pts&flr&ded&layout&qfixed&qptsbyans&flags
cdc4.001&mcs&0&&Which of the following paper finishes has a ribbed appearance?&Laid&Linen;Vellum;Felt;&&&&n&IV-A-2.0&&&&
cdc4.002&mcs&0&&What is the weight of 500,000 8 1/2 inches x 11 inches cut sheet forms constructed with 24# MICR bond paper?&6000 lbs&7500 lbs;8500 lbs;4000 lbs;&&&&n&IV-A-4.0&&&&
cdc4.003&mcs&0&&Which of the following is a process used in recycling paper?&De-inking&Deleaving;Delaminating;Desensitizing;&&&&n&IV-A-7.0&&&&
cdc4.004&mcs&0&&Which of the following papers should be used for an application where permanency and low cost are major considerations?&Acid-free bond&High-acid paper;100% cotton bond;Sulphate bond;&&&&n&IV-A-8.0&&&&
cdc4.005&mcs&0&N&<i>Show-through</i> is best defined as the &property of a paper that allows print to be seen from the unprinted side.&method of transfer when double-faced carbon is used with translucent paper.;transfer of ink from the printed side of paper to the underside of the paper stacked above.;penetration of ink through paper to the back side.;&&&&n&IV-A-8.0&&&&
cdc4.006&mcs&0&&In paper making, long fibers from softwood contribute to which of the following?&Strength&Legibility;Brightness;Manifolding;&&&&n&IV-A-8.0&&&&
cdc4.007&mcs&0&&Supercalendering of coated paper is primarily intended to obtain a uniform&gloss.&opacity.;bulking.;brightness.;&&&&n&IV-A-9.0&&&&
cdc4.008&mcs&0&&Which of the following coatings is the most durable and exhibits the glossiest appearance?&Lamination&Ultraviolet;Varnish;Aqueous;&&&&n&IV-B-2.0&&&&
cdc4.009&mcs&0&&Which of the following describes stripe carbons?&Uncoated area running parallel to the stub&They are more cost-effective than narrow carbon;Uncoated area running perpendicular to the line holes in continuous forms;They stop the transfer of information to all subsequent parts;&&&&n&IV-C-2.0&&&&
cdc4.010&mcs&0&&Which of the following papers can be imaged when used as part 1 of a set processed in an imprinting machine without a ribbon?&Self-contained&MICR bond;Mechanical transfer;Coated front carbonless;&&&&n&IV-D-1.0&&&&
cdc4.011&mcs&0&&Which of the following best describes thermochromatic inks?&Change color in response to touch&Glow after exposure to ultraviolet light;Must be heated to produce raised effect;React to metal and turn black when rubbed;&&&&n&IV-E-1.0&&&
cdc4.012&mcs&0&&Which of the following carbonless papers is LEAST likely to be damaged by excessive pressure?&Coated front&Self-contained;Coated front and back;Coated back;&&&&n&IV-D-4.0&&&&
cdc4.013&mcs&0&&When back printing, which of the following is a way to minimize the effect of CB capsule damage?&Screen on CB side&Print with solid ink coverage;Place slipsheet between sets;Screen on CF side;&&&&n&IV-D-4.0&&&&
cdc4.014&mcs&0&&Which of the following types of carbonless paper can be most readily desensitized for withholding confidential data?&Chemical-mated&Thermal;Mechanical transfer;Chemical self-contained;&&&&n&IV-D-4.0&&&&
cdc4.015&mcs&0&&If a carbon and carbonless paper are to be combined in the same form, what precaution is recommended?&The carbon should be approved by the carbon or carbonless manufacturer &An intense carbon should be used;The carbon coating should always face the CF coating;The carbon should be collated immediately before use;&&&&n&IV-D-4.0&&&&
cdc4.016&mcs&0&&Which of the following procedures will produce the closest ink color match?&Drawdown on a specified base stock&Specifying a manufacturer's standard color;Specifying a double bump of the ink color;Specifying a PMS ink color;&&&&n&IV-E-3.0&&&&
cdc4.017&mcs&0&&Ink that smears long after printing on the CB side of carbonless paper is most likely the result of &ink drying problems.&dusty paper surface.;improper print sequence.;inadequate coverage.;&&&&n&IV-E-4.0&&&&
cdc4.018&mcs&0&&Which of the following colors used in four color process is included primarily to create depth?&Black&Yellow;Magenta;Cyan;&&&&n&IV-E-5.0&&&&
cdc4.019&mcs&0&Y&If a pressure-sensitive label is required to stick firmly on first contact, a user should specify&&&&&&n&IV-F-1.0&&&&
cdc4.020&mcs&0&&A low moisture content in laser cut sheets is most likely to cause&static buildup.&poor print quality.;ink offsetting.;excessive curl.;&&&&n&IV-A-8.0&&&&
cdc4.021&mcs&0&&Which of the following is the most appropriate label stock to be computer printed and affixed to a curved surface?&Latex impregnated&Cast coated;Laminated foil;Clear polyester;&&&&n&IV-B-1.0&&&&
cdc4.022&mcs&0&&Which of the following papers will yield the sharpest halftone reproduction?&Gloss coated&Carbonless coated;Offset;Matte coated;&&&&n&IV-A-8.0&&&&
cdc4.023&mcs&0&&A long-range bar code scanner works best with&retro-reflective stock.&direct thermal stock.;smudgeproof stock.;brushed foil stock.;&&&&n&IV-B-1.0&&&&
cdc4.024&mcs&0&&If a customer requested thermographic printing for letterheads which were going to be used in a sheet fed laser printer, which of the following would be the best course of action?&Use laser-compatible thermography&Never use thermographic printing for laser printers;Use debossed printing instead of thermographic printing;Use embossed printing instead of thermographic printing;&&&&n&IV-E-1.0&&&&
cdc4.025&mcs&0&&If a user requires a pressure-sensitive label with a removable adhesive, which of the following is the MAJOR consideration?&Specified period of use&Temperature of application;Degree of tack;Speed of application;&&&&n&IV-F-1.0&&&&
cdc4.026&mcs&0&&If a pressure-sensitive label is required to stick firmly on first contact, a user should specify&high tack.&permanent adhesive.;removable adhesive.;low tack.;&&&&n&IV-F-1.0&&&&